How To Use Speedfan On Windows 10: Step By Step Guide

Summary: In this article, we will discuss what SpeedFan is and how to use Speedfan for cooling on Windows 10.

What is SpeedFan?

SpeedFan is developed to monitor the temperature and voltage of PC components. It can also control the speed of the fan on your computer.

Why Do You Need To Use SpeedFan On A Windows 10 Laptop or PC?

If your computer is experiencing too much load. Then it is possible that your Processor and other components are heating. Which could damage the internal parts of your computer.

Fans are pre-installed on the laptop or computers, Which are responsible for throwing warm air out of the system and keeping your PC cool. But sometimes the PC gets too hot and the fan inside your PC does not recognize it. And they don’t provide efficient cooling to your system. Which causes serious damage to your computer.

SpeedFan is a dedicated program that can control the speed of the fan inside your PC or laptop. It can command the fan to speed up and provide better cooling in your system.

SpedFan: Program Summary

Publisher: Sokono S. R. L

Size: 2.94 MB

Latest Version: 4.52

Price: Free

Ratings and Reviews:

• Cnet: 3.6/5
• TechSpot: 45.5/5
• FileHippo: 6.3/10
• Softonic: 7/10
• DigitTrends: 7/10

Note: To install and use SpeedFan your motherboard needs to be compatible with the software. To know the list of supported motherboards you can visit the official page

How To Use SpeedFan On Windows 10 Computer or Laptop:

To use SpeedFan you need to follow the step-by-step guide below:

Step 1: Turn Off Fan Control Via BIOS:

As we all know, the windows system controls the fan inside your PC or laptop. And now if you want SpeedFan to control the speed of your Fans you need to disable the Windows system’s ability to control the fans.

So, there will not be conflicts between SpeedFand and the Windows system. To do this first of all you need to go to your bios setting and disable fan controls.

To do this follow these steps-

Step 1: Restart your computer and while booting press the F2’, ‘F8’, ‘F10’, or ‘F12′ keys. One of these keys will enter you into the bios mode. Your computer may support different keys to enter the bios.

Step 2: Go to Fan settings or Smart Fan. Find the section “Smart Fan“ or ”Fan Settings” and select it. You can find these options under “advanced, ”CPU” or ”Hardware Monitor”.

Step 3: Here you will easily be able to disable fan controls.

Also Read: 9 Best PC Cleaner and Optimization Software For Windows 10, 8, 7 [2021]

After these settings, you can start using SpeedFan on Windows 10 laptop or PC. Just follow the next steps.

Step 2: Install and Setup Speedfan

Step 1: It is easy to download and install SpeedFan. Download it from the official website almico

Note: If you have already downloaded SpeedFan make sure you see the verified publisher “Sokono S. R.” if you don’t see this. Uninstall it right away and download it from the link above or from the official website almico.

Step 2: Launch the program from the automatic shortcut made on your desktop.

After launching, give the program some time to scan components on your PC. It will analyze the voltage and temperature of some specific components on your PC like GPU, CPU, and hard drives.

In order to start using SpeedFan on Windows 10, you need to make some settings in the software.

Step 3: Go to the configure tab and find “set fans to 100% on program exit” it should be checked yes. And also find “Delta value for fan speeds”. Set it to the maximum which should be 99.

Step 4: Now stay in the configure tab and you will see here the “advanced ” tab. Click on that.

Here you will see a drop-down menu where you will be able to see your motherboard’s superIO chip and select that chip. Find the PWM mode you have to change it to manual PWM control. Move to the next step to use SpeedFan.

Step 5: After selecting the superIO chip. You can select any component and set the fan speed percentage.

Note: You need to set the fan speed to more than 30%.

Step 6: After this go to the speed tab and check the box “automatically varied”.

Step 7: Now go to the “Temperature” tab. Here you can select a specific chip and set the temperature. In the “desired” option you have to set the temperature above which you want the software to start cooling.

And in the warning tab, you have to set the temperature above which you want the software to show you a warning message. So that you can check the cooling process or close some programs.

 

Step 8: Check the “show in tray” option for the chips you want to monitor more frequently.

So this was the complete process of How to Use SpeedFan on a Windows 10 PC. Follow this step-by-step guide and you will be able to control fans on your laptop or PC in order to get a better cooling system.

FAQs:

Question: Is SpeedFan Free?

Answer: Yes, the program is completely free.

Question: Does SpeedFan Work on Windows 10?

Answer: Yes, it works on Windows 10, 7 Windows 9x, ME, NT, 2000, 2003, XP, Vista, Windows 7, 2008, Windows 8, and Windows Server 2012

Question: Can I use SpeedFan on laptops?

Answer: yes, you can use the SpeedFan Program on Laptops, provided that you have a compatible operating system installed.

Question: How hot is too hot for the CPU?

Answer: If the CPU temperature is above 176 Degrees F or 80 C then you should be concerned.

Question: What is the latest version of SpeedFan?

Answer: The latest version of SpeedFan that you can use is 4.52. (till 3/12/2021)

Question: How hot should a laptop get?

Answer: If your laptop’s temperature is somewhere between 45F to 95F then it is ok.

Question: What needs more cooling: Laptop or PC?

Answer: Generally laptops have lower specs than PCs so, I would say laptops need more care.